我爱蒙城

 找回密码
 邮件注册
搜索
查看: 4603|回复: 0
打印 上一主题 下一主题

HONDA DTC P1738含义

[复制链接]

562

主题

669

帖子

3616

积分

超级版主

Rank: 8Rank: 8

积分
3616
跳转到指定楼层
楼主
发表于 2018-7-18 15:30:15 | 只看该作者 |只看大图 回帖奖励 |倒序浏览 |阅读模式
本帖最后由 闲云野鹤 于 2018-7-18 15:32 编辑

https://www.autocodes.com/p1738_honda.html

P1738 HONDA - Problem in 2nd Clutch Pressure Switch Circuit        
Possible causes Faulty 2nd Clutch Pressure Switch
2nd Clutch Pressure Switch harness is open or shorted
2nd Clutch Pressure Switch circuit poor electrical connection

Read more: https://www.autocodes.com/p1738_honda.html

The second clutch pressure switch in the transmission has an issue. There is a test to perform to make sure the engine's processor is not at fault, or a wiring issue. Then, if the test suggests it, you could replace the 2nd clutch pressure switch. This can be done externally. It does not appear to be terribly expensive, less than $200 perhaps.

My only concern is that the code could be masking an internal problem, and that even with replacement of the switch, if that's what it ends up being, there could still be an internal concern that will require internal repair or replacement. So, do use caution.


DTC P1738 = 2nd clutch Presssure switch.

It is a fault in the transmission system and cost would depend on what is at fault. It could be a loose wire connection, faulty pressure switch or even a faulty PCM.

You should be having problem with gear shifting correctly.


回复

使用道具 举报

您需要登录后才可以回帖 登录 | 邮件注册

本版积分规则

手机版|I Love Montreal  

GMT-5, 2024-12-11 16:18 , Processed in 0.019249 second(s), 27 queries .

Powered by Discuz! X3.2

© 2001-2013 Comsenz Inc.

快速回复 返回顶部 返回列表